Xerox 6060 manual Proceed to Reinstalling the Creo Application Software on

Reinstalling the Operating System 95

6.Use the arrows to select Creo Software Complete Overwrite Installation and press ENTER.

Note: If the Norton Ghost® License Agreement Warning appears, select OK to mark the drives as usable by Norton Ghost.

The warning will only appear if you have installed a new SCSI hard disk.

The system starts copying the files.

After a few minutes, you are prompted to remove the CD-ROM from the CD/DVD-ROM drive and reboot.

7.Press CTRL+ALT+DEL to reboot.

The system copies files and reboots a few times.

8.When the Windows 2000 Professional Setup screen appears type the 25-digit Product Key, that comes with the Windows 2000 Professional manual, and click Next.

9.In the Computer Name and Administrator Password screen, type the name for the CXP6000 Color Server, for example CXP6000_1.

Important: In the administrator name and password area, use the default settings. If required, you can change the administrator name and password, but only at the end of the installation process (see If you want to change the administrator name and password: on page 133, or If you want to change the user password: on page 133).

10.Click Next.

The installation process begins.

11.At the end of the installation, the system reboots a number of times. You are asked to insert the Application Software CD-ROM (CD-ROM #2A or #2B) into the CD/DVD-ROM drive.

12.Proceed to Reinstalling the Creo Application Software on page 96.