Gateway and Network Configuration
SNMP gateway configuration
SNMP displays the status of network devices. Using the SNMP tab in the Xerox FreeFlow Print Server Gateways, the administrator can select among a number of features and settings for SNMP.
NOTE: SNMP requires a standard license. The System
Administrator must enable SNMP in License Manager.
Xerox recommends the following
•IBM Network Printer Manager (XP)
•TNG Unicenter (XP)
•HP OpenView (UNIX, XP)
•Xerox CentreWare (UNIX, XP)
NOTE: The SNMP manager (for example, HP OpenView) may have a number of requests into the Xerox FreeFlow Print Server for information. The requested information may not be among the supported data sets on the Print Server. When this occurs, the SNMP client/manager displays “no value...etc".
NOTE: You can have more than one SNMP manager running at the same time.
Additional features supported in SNMP
SNMP support for the following features are product dependent:
•The ability to ‘SET’ attributes.
•The ability to localize text and units of measure.
•The ability to support a number of MIBs related to finishing and printing.
•The ability to perform automatic meter reading.
The following table specifies which Xerox products have these
SNMP supported features:
Table | SNMP Supported Features by Product | ||||
|
|
|
| ||
DT 61XX |
|
| Nuvera | ||
Feature | and DP | EPS 1XX | iGen | ||
1xx | |||||
| 1xx |
|
| ||
|
|
|
| ||
|
|
|
|
| |
Ability to SET Attributes Y |
| Y | N | Y | |
|
|
|
|
| |
System Guide |
