Finishing
•Auto Accept Settings Changes - This mode will automatically update the tray programming on the Xerox FreeFlow Print Server to match what is reported by the Printer. This option is not available on Nuvera C/P.
NOTE: Only System Administrators can set Tray Confirmation options.
NOTE: Tray confirmation is not available on iGen3 with Xerox
FreeFlow Print Server.
Tray mapping
The Xerox FreeFlow Print Server allows the operator to select and save tray mappings for recurring jobs or for jobs needing the same mapping.
From the Printer GUI, the operator selects [Save Mapping]. The dialog box [Save Settings] enables the user to either select an existing mapping or create a new mapping by assigning a name and entering a description in the Comments input area. The operator can also delete mappings.
To apply the saved mapping to another print run, the operator accesses the Save Settings dialog box, selects the desired saved setting and selects [OK]. This action reprograms all the trays to the values previously stored.
Mapping trays to media
On the Xerox FreeFlow Print Server printer, the media sources are set up for each queue on the printer interface. The user can map trays to media in the XPIF job ticket and then use the mapping with the embedded PCL paper source commands in the data stream.
Once the print job has been sent, the user cannot change media sources. However, the XPIF job ticket media source to tray mapping can be overridden for all the trays on the queue.
There are two ways in which an operator can specify the PCL tray to media mapping:
1.XPIF job ticket. This ticket must be
2.IPP Attributes. The information in the XPIF ticket and IPP attributes become part of the job attributes sent to the system.
System Guide | 4- 5 |
