Xerox 701P25032 manual Tray programming, Tray confirmation

Finishing

number code corresponds to the following PCL Paper Source programmed in Queue Properties.

To program the PCL Paper Source, use the following guidelines:

Standard: <ESC>&11H

Manual Paper Feed: <ESC>&13H

Manual Envelope Feed: <ESC>&13H

Lower: <ESC>&14H

Large Capacity: <ESC>&15H

Envelope Feed: <ESC>&16H

Tray programming

Tray confirmation

Tray confirmation selections control:

•whether a confirmation pop-up window appears on the screen after a tray has been opened and closed

•what attributes are assigned to that tray

•whether the action is automatic or requires user action to confirm the programming change

To set tray programming options, perform the following:

1.On the main menu select [Setup]

2.Select [System Preferences]

3.Select the [Stocks and Trays] tab

Settings are system-wide and are applied immediately. No restart of the Xerox FreeFlow Print Server software required.

Tray Confirmation options:

•None - No tray confirmation pop up. The system assumes tray refill, but if tray attributes change, the tray will fault. To clear the fault modify the programming to match the tray. In addition, the “New Stock has been Loaded” option must be selected.

•When Tray Settings Change - A tray confirmation pop up appears every time a stock attribute changes.

•After Every Tray Cycle - A tray confirmation pop up appears every time a tray is opened and closed, or the Printer reports a new stock attribute.

4-4 System Guide