Troubleshooting
NOTE: This procedure performs the file check and takes about one minute. The # symbol appears again.
If there are problems starting the software, check the console window for messages.
Loading XJDC/Unix
The Xerox Job Description Compiler is loaded by entering the following on the command line:
/opt/XRXnps/bin/XJDC
The filename is the name of the JSL file that is to be compiled. The JSL filename is required to terminate with the suffix.jsl or
.JSL. The filename may contain path information.
Many options may be specified and shown in the above example. The options may be specified in any order and are
•REPlace / NOReplace: Replace or backup existing PDL object files.
•DISplay / NODisplay: Display or suppress XJDC messages.
•PRInt / NOPrint Generate: JSL compilation listing always or only when errors/warnings occur.
•TRUncate / NOTruncate: Truncate or accept JSL source lines after 72 characters.
•LABel / NOLabel: Generate or suppress
•COMpile / SCAn: Compile with output or scan only.
•SINglebyte / DOUblebyte: Use singlebyte or doublebyte code and printer carriage control translation files.
•Vx: LPS PDL version number, x = 10, 2, 35, 3615, 37, 38, 39, 40, 50, 3A, M10.
•PAPersizes: Paper size to use for PDL VM10, s = USLEGAL / USLETTER / A4.
•DATed = d: Date format, d = US / EUROPEAN.
•PAGinate = p: Lines per page, n = 0, 5 to 999 (0 means no pagination).
•OUTpath=p: Base directory for output files, p = <path>, default is current directory (Note that ~ is not supported.).
System Guide |
