Xerox 701P25032 manual Billing meters

Accounting and Billing

•Sheets purged by the system for fault recovery or image quality adjustment.

Billing meters

The Xerox Billing Meter window tracks the time and date of the last meter read and the following Print Billing Report options are retained between restarts:

•Queue name for printing the Billing Report.

•Customer ID (Customer Name)

•Machine ID (serial number).

The printing information is pre-loaded and only needs to be entered once in the system. The customer or service representative completes the entry and prints the Billing report. This stores the values. But if the values stored are in error in some way, they are editable.

Table 6-1Billing Meters for Regions

Market	Billing Meters for Region
Region
Region 1	Meter A: Total impressions to an output destination
	including Administration Pages.
	Meter B: Total impressions for each image of the job
	up to and including the last sheet of the 10th set.
	Does not include Administration Pages.
Region 2	Meter 1: Total impressions to an output destination
	including Administration Pages.
	Meter 2: Total impressions printed on sheets wider
	than 9”. Includes Administration Pages.
	Meter 3: Total impressions for sets 11-18. Begins
	counting with the first image in set 11 and stops after
	the last image in set 18. Does not include
	Administration Pages.
	Meter 4: Total impressions in set 19 of every
	document printed. Does not include Administration
	Pages.
Region 5	Meter A: Total impressions to an output destination
	including Administration Pages.

6-1 0 System Guide