Yamaha 02R96 11 Common Channel Functions

Common Channel Functions 87
02R96—Owner’s Manual
11 Common Channel Functions
Metering
Input Channels, Bus Outs, Aux Sends, the Stereo Out, and the effects processors can be
metered on the various Meter pages, which are located by using the DISPLAY ACCESS
[METER] button.
Input and Output Channel Meter pages also display fader positions numerically. The Peak
Hold function, which applies to all level meters, can be turned on or off on any of the Meter
pages.
Setting the Metering Position
Input and Output Channels can be metered pre-EQ, pre-fader, or post-fader. This setting,
which can be set independently for the Input and Output Channels, can be set on the
Metering Position page shown below, or any of the Input and Output Channel Meter pages.
PRE EQ: Channels are metered pre-EQ.
PRE FADER: Channels are metered pre-fader.
POST FADER: Channels are metered post-fader.
Metering Input Channels
There are two types of Input Channel Meter page: 24-channel and 48-channel.
There are three 24-channel Meter pages. The Input Channel 1–24 Meter page is shown
below. The layout of the other two pages is the same. These pages feature two level meters
for each Input Channel. When Input Channels are vertically paired, both meters operate.
When Input Channels are horizontally paired, only the left-hand meter operates.