Yamaha 02R96 - page 112

Compressing Channels 99
02R96—Owner’s Manual
3Use the SELECTED CHANNEL DYNAMICS [DISPLAY] button to locate the
Comp Edit page.
4Use the cursor buttons to select the parameters, and use the Parameter
wheel, INC/DEC buttons, and [ENTER] button to set them.
POSITION: This determines the position of the Compressor within the channel, and can
be set to pre-EQ, pre-fader, or post-fader. It works in unison with the COMP POSITION
parameter on the Insert page. See “Using Inserts” on page 95 for more information.
STEREO LINK: This allows you to pair Comps for stereo operation even when channels
are not paired. Input Channel Comps are paired either horizontally or vertically depending
on the Pair mode setting for the currently selected Input Channel. See “Pairing Channels”
on page 104 for more information on horizontal and vertical pairing. When channels are
paired, this parameter is turned on automatically and cannot be changed.
CURVE: This displays the Compressor curve (i.e., input level vs. output level).
TYPE: This is the comp type used by the currently selected channel’s Compressor.
Meters: These meters indicate the levels of the currently selected Input Channel and its
horizontal or vertical partner. The GR meter indicates the amount of gain reduction being
applied by the currently selected channel’s Compressor.
ON/OFF: This turns the currently selected channel’s Compressor on and off. It works in
unison with the SELECTED CHANNEL DYNAMICS [COMP ON] button.
PARAMETER: These controls are used to set the Threshold, Ratio, Attack, Release, Out
Gain, and Knee parameters.