Yamaha 02R96 158 , Editing Events Ofine

158 Chapter 16—Automix

02R96—Owner’s Manual

Editing Events Ofﬂine

Automix events can be edited ofﬂine on the Event Copy and Event Edit pages. Ofﬂine edit-

ing can be performed only while the Automix function is stopped.

On the Event Copy page, speciﬁed events on speciﬁed channels between speciﬁed in and

out points can be erased, copied, moved/merged, or trimmed.

1Use the DISPLAY ACCESS [AUTOMIX] button to locate the Event Copy page.

2Use the cursor buttons to select the parameters, and use the Parameter

wheel, INC/DEC buttons, and [ENTER] button to set them.

Channel buttons: These buttons are used to specify the Input and Output Channels

whose Automix data you want to erase, copy, move/merge, or trim. In other words, the

source data. A channel is speciﬁed when its button appears highlighted. Multiple channels

can be speciﬁed. Channel buttons can be selected by using the Parameter wheel or the cur-

sor buttons. You can specify all channels by double-clicking any channel button. A conﬁr-

mation message appears and you can select one or all channels. It’s not necessary to select

source channels when editing library or Scene recall events or effects or Plug-Ins events.

SOURCE: These parameters are used to select the source Automix for copying and mov-

ing/merging. You can select CURRENT, i.e., the current Automix, or MEM and any Auto-

mix from 1 to 16. When MEM is selected, the MOVE button changes to MERGE. The Erase

and Trim functions work only with the current Automix and ignore these settings.

TIME SETTING: The IN and OUT parameters are used to specify the region of Automix

data to be erased, copied, moved/merged, or trimmed. The IN and OUT points can be set

on-the-ﬂy by pressing the [ENTER] button while the IN or OUT button is selected. The

captured timecode values can be edited by using the Parameter wheel or the INC/DEC but-

tons. Press the [ENTER] button to reset the currently selected digits to “00.” Up to eight IN

and OUT timecode values can be captured and stored in the eight Capture memories. Use

the cursor buttons to select the Capture memory number, and use the Parameter wheel or

the INC/DEC buttons to select the Capture memories.

The TO parameter is used to specify the point to which the speciﬁed data will be copied or

moved/merged. The TO point can be set on-the-ﬂy by pressing the [ENTER] button while

the TO button is selected. The captured timecode value can be edited by using the Param-

eter wheel or the INC/DEC buttons. Press the [ENTER] button to reset the currently

selected digits to “00.”

The DESTINATION parameter is used to specify the channel to which the speciﬁed data

will be copied or moved/merged. The number of destination channels depends on the

number of source channels speciﬁed. For example, if Input Channels 1 though 8 are speci-

ﬁed as the source, then the number of destination channels will be eight. Destination chan-

nels are contiguous and only the ﬁrst channel in the range can be speciﬁed.