248 Appendix A: Parameter Lists
02R96—Owner’s Manual

M. BAND DYNA.

Two input, two output 3-band dynamics processor, with individual solo and gain reduction

metering for each band.

Parameter Range Description
LOW GAIN 96.0 to +12.0 dB Low band level
MID GAIN 96.0 to +12.0 dB Mid band level
HI. GAIN 96.0 to +12.0 dB High band level
PRESENCE 10 to +10
For positive values, the threshold of the high band is low-
ered and the threshold of the low band is increased. For
negative values, the opposite will occur. When set to 0, all
three bands are affected the same.
EXP. THRE 54.0 dB to 24.0 dB Expander threshold
EXP. RAT 1:1 to :1 Expander ratio
EXP. REL 1
1. 6.0 ms46.0 s (fs=44.1 kHz), 5.0 ms42.3 s (fs=48 kHz), 3 ms23.0 s (fs=88.2 kHz), 3 ms21.1 s
(fs=96 kHz)
Expander release time
EXP. BYP ON/OFF Expander bypass
CMP. THRE 24.0 dB to 0.0 dB Compressor threshold
CMP. RAT 1:1 to 20:1 Compressor ratio
CMP. REL 1Compressor release time
CMP. ATK 0120 ms Compressor attack
CMP. KNEE 05 Compressor knee
CMP. BYP ON/OFF Compressor bypass
LIM. THRE 12.0 dB to 0.0 dB Limiter threshold
LIM. REL 1Limiter release time
LIM. ATK 0120 ms Limiter attack
LIM. KNEE 05 Limiter knee
LIM. BYP ON/OFF Limiter bypass
LOOKUP 0.0100.0 ms Lookup delay
LM XOVR 21.2 Hz8.00 kHz Low/mid crossover frequency
MH XOVR 21.2 Hz8.00 kHz Mid/high crossover frequency
SLOPE 6 dB to 12 dB Filter slope
CEILING 6.0 dB to 0.0 dB, OFF Species the maximum output level