118 Chapter 12—Monitoring & Talkback
02R96—Owner’s Manual
MONITOR MATRIX: This is used to select the Surround Monitor Matrix. In 5.1 Sur-
round mode, you can select 5.1, 3-1, or ST. In 3-1 Surround mode, you can select 3-1 or ST.
The ATT parameters can be used to attenuate individual Surround Channel signals. The
following diagrams, which show the Monitor Matrixes available in each Surround mode,
are displayed when this parameter is selected.
BASS MANAGE: This parameter is used to select the five preset Bass Management
modes. Use the ON/OFF button to turn Bass Management on and off. The following table
lists the Bass Management preset parameter values (“w/BS” means with Bass Manage-
ment). SMALL speakers are assumed for the presets.
If you are using the 3-1 monitor matrix, even with film sources, use presets 1 and 2, as pre-
sets 3 and 4 may not provide correct monitoring.
Bass Management parameters can be set as follows.
“80-12” means a cutoff frequency of 80 Hz and a filter response of –12 dB/octave. “L” means
Linkwitz filter. Other filters are Butterworth.
Presets Parameters
# Title HPF LPF1 LPF2 ATT AMP
1DVD Mix w/BS 80-12 80-24 80-24 0 10
2DVD Author w/BS 80-12 120-42 80-24 0 10
3Film Mix w/BS 80-12 80-24 80-24 –310
4Film Author w/BS 80-12 120-42 80-24 –310
5Bypass THRU THRU MUTE 0 0
Parameter Range
HPF THRU, 80-12, 80-12L, 80-24, 80-24L
LPF1 THRU, 80-24, 80-24L, 120-42
LPF2 THRU, 80–24, 80-24L, MUTE
ATT 0 to –12 dB (1 dB steps)
AMP 0 to +12 dB (1 dB steps)
3-1 to 3-1 3-1 to ST
5.1 to 5.1 5.1 to 3-1 5.1 to ST