268 Appendix B: Specifications
02R96—Owner’s Manual
Analog Input Spec
In these specifications, when dB represents a specific voltage, 0 dB is referenced to 0.775 Vrms.
For 2TR IN ANALOG 2 levels, 0 dBV is referenced to 1.00 Vrms.
All input AD converters (except INSERT I/O 116) are 24-bit linear, 128-times oversampling.
+48 V DC (phantom power) is supplied to CH INPUT (116) XLR type connectors via individual switches.
Analog Output Spec
STEREO OUT [L, R], 0 dBV is referenced to 1.00 Vrms.
In these specifications, when dB represents a specific voltage, 0 dB is referenced to 0.775 Vrms.
All output DA converters (except INSERT OUT 116) are 24-bit, 128-times oversampling.
Input PAD GAIN Actual Load
Impedance
For Use
With
Nominal
Input level
Connector
Sensitivity1
1. Sensitivity is the lowest level that will produce an output of +4 dB (1.23 V) or the nominal output level when the unit
is set to maximum gain. (All faders and level controls are maximum position.)
Nominal Max.
before clip
INPUT A/B 116
0
60
dB
3k
50600
Mics &
600
Lines
70 dB
(0.245 mV)
60 dB
(0.775 mV)
46 dB
(3.88 mV)
A: XLR-3-31 type (Bal-
anced)2
2. XLR-3-31 type connectors are balanced (1=GND, 2=HOT, 3=COLD).
16
dB
26 dB
(38.8 mV)
16 dB
(0.123 V)
2 dB
(616 mV)
B: Phone jack (TRS)
(Balanced)3
3. Phone jacks are balanced (Tip=HOT, Ring=COLD, Sleeve=GND).
26 0 dB
(775 mV)
+10 dB
(2.45 V)
+24 dB
(12.28 V)
INPUT 1724
34
dB 4K 600
Lines
44 dB
(4.89 mV)
34 dB
(15.5 mV)
20 dB
(77.5 mV) Phone jack (TRS) (Bal-
anced)3
+10
dB
0 dB
(775 mV)
+10 dB
(2.45 V)
+24 dB
(12.28 V)
INSERT IN 116 10K 600
Lines
6 dB
(388 mV)
+4 dB
(1.23 V)
+18 dB
(6.16 V) Phone jack (TRS)4
4. Phone jacks are wired: Tip=OUT, Ring=IN, Sleeve=GND
2TR IN ANALOG
1 [L, R] 10K 600
Lines
+4 dB
(1.23 V)
+4 dB
(1.23 V)
+18 dB
(6.16 V)
Phone jack (TRS) (Bal-
anced)3
2TR IN ANALOG
2 [L, R] 10K 600
Lines
10 dBV
(0.316 V)
10 dBV
(0.316 V)
+4 dBV
(1.58 V) Phono (Unbalanced)
Output Actual Source
Impedance
For Use
With
Nominal
GAIN SW1
1. The maximum output level of each OMNI OUT can be set internally.
Output level
Connector
Nominal Max. before
clip
STEREO OUT [L, R]
600 10k Lines 10 dBV
(0.316 V)
+4 dBV
(1.58 V) Phono (Unbalanced)
150 600 Lines +4 dB
(1.23 V)
+18 dB
(6.16 V)
XLR-3-32 type (Bal-
anced)2
2. XLR-3-32 type connectors are balanced (1=GND, 2=HOT, 3=COLD).
STUDIO MONITOR OUT
[L, R] 150 10k Lines +4 dB
(1.23 V)
+18 dB
(6.16 V)
Phone Jack (TRS) (Bal-
anced)3
3. Phone jacks are balanced (Tip=HOT, Ring=COLD, Sleeve=GND).
C-R MONITOR OUT [L, R] 150 10k Lines +4 dB
(1.23 V)
+18 dB
(6.16 V)
Phone Jack (TRS) (Bal-
anced)3
OMNI OUT 18150 10k Lines
+18 dB
(default)
+4 dB
(1.23 V)
+18 dB
(6.16 V) Phone Jack (TRS) (Bal-
anced)3
+4 dB 10 dB
(0.245 V)
+4 dB
(1.23 V)
INSERT OUT 116 600 10k Lines +4 dB
(1.23 V)
+18 dB
(6.16 V) Phone Jack (TRS)4
4. Phone jacks are wired: Tip=OUT, Ring=IN, Sleeve=GND
PHONES 100 8 Phones 4 mW 25 mW Stereo Phone Jack (TRS)
(Unbalanced)5
5. PHONES stereo phone jack is unbalanced (Tip=LEFT, Ring=RIGHT, Sleeve=GND).
40 Phones
12 mW 75 mW