Channel Library 123
02R96—Owner’s Manual
Channel Library
Input Channel, Bus Out, Aux Send, and Stereo Out channel settings can be stored in the
Channel library, which contains 2 preset memories and 127 user memories.
1Use the DISPLAY ACCESS [VIEW] button to select the Channel Library page.
2Use the LAYER buttons to select Layers, and the [SEL] buttons to select chan-
nels.
When storing, the settings of the currently selected channel are stored to the selected mem-
ory. When recalling, the settings in the selected memory are applied to the currently selected
channel.
Only memories whose contents correspond to the currently selected channel can be
recalled. For example, you can recall Input Channel settings to Input Channels, but not to
Aux Sends. When the selected memory and currently selected channel don’t correspond, a
warning triangle and the word “CONFLICT” appear in the STORED FROM box.
Preset memory #0, “Reset(–dB),” resets all parameters of the currently selected channel to
their initial values and sets the channel level to – dB. Preset memory #1, “Reset (0dB),”
also resets all parameters, but sets the channel level to 0 dB (i.e., nominal).
SEL CH: This indicates the currently selected channel.
CURRENT CONFIGURATION: If the currently selected channel is an Input Channel,
Surround mode and Aux configuration information is displayed here.
Level meters: These meters indicate the levels of the currently selected Input Channel
and its horizontal or vertical partner.
STORED FROM: This indicates the channel whose settings were originally stored in the
selected memory. If the currently selected channel is an Input channel, Pan mode and Aux
pairing information is also displayed.
For details on the Store, Recall, Title Edit, and Clear functions, see “General Library Oper-
ation” on page 122.