Yamaha 02R96 Delaying Channel Signals

Delaying Channel Signals 101
02R96—Owner’s Manual
Delaying Channel Signals
Input Channels, Bus Outs, Aux Sends, and the Stereo Out all feature independent Delay
functions. Input Channel Delays feature feedback, with independent Mix and Gain param-
eters.
1Use the SELECTED CHANNEL DISPLAY ACCESS [DELAY] button to select the
Delay pages.
The Delay parameters for the 56 Input Channels are arranged into three pages. The Input
Channel 1–24 Delay page is shown below. The layout of the other two pages is the same.
The Delay parameters for the Bus Outs, Aux Sends, and the Stereo Out appear on the Out-
put Delay page.
2Use the cursor buttons to select the Delay parameters, and use the Parameter
wheel, INC/DEC buttons, and [ENTER] button to set them.
Input and Output Channels can also be selected by using the LAYER and [SEL] buttons.
DELAY SCALE: These buttons determine the units of the delay value shown below the
msec value. Units can be set to meters, feet, samples, beats, or timecode frames.
GANG: When this option is turned on, the delay time for paired channels can be set simul-
taneously. Ganging is relative, so any delay time difference between the two channels is
maintained when this is turned on.
ON/OFF: These buttons turn the individual Delay functions on and off. The [ENTER]
button can be used to turn a Delay on and off regardless of which parameter is selected.
msec: This sets the delay time in milliseconds. The delay time can also be set by using the
parameter below, which is the delay time in the units selected by the DELAY SCALE but-
tons. You can copy the currently selected Input or Output Channel delay setting to all Input
or Output Channels respectively by double-clicking the [ENTER] button.