Control Surface 15
02R96—Owner’s Manual
LAYER
A 1–24 & 25–48 buttons
These buttons select the Input Channel Layers, which determine which Input Channels are
controlled by the channel strips. The LAYER button indicator for the currently selected
Layer lights up. See “Selecting Layers” on page 33 for more information.
B REMOTE button
This button selects the Remote Layer, which can be used to control external devices, includ-
ing DAWs. See “About the Remote Layer” on page 189 for more information. Its button
indicator lights up when the Remote Layer is selected. See “Selecting Layers” on page 33 for
more information.
C MASTER button
This button selects the Master Layer, from which the channel strips control Input Channels
49–56, Bus Outs, and Aux Sends. Its indicator lights up when the Master Layer is selected.
See “Selecting Layers” on page 33 for more information.
STEREO
A AUTO button
This button is used exclusively to set Automix recording and playback for the Stereo
Out. Its indicator lights up orange in Record-Ready mode, red while recording, and
green during playback. See “Channel Strip [AUTO] Buttons” on page 149 for more
information.
B SEL button
The Stereo Out [SEL] button is used exclusively to select the Stereo Out for editing with
the SELECTED CHANNEL section. Its indicator lights up when the Stereo Out is
selected. Each time it’s pressed, the selection toggles between the Stereo Out’s left and
right channels. See “Selecting Channels” on page 34 for more information. It can also
be used to add and remove the Stereo Out to and from EQ, Comp, Fader, and Mute
groups.
C ON button
This button is used exclusively to mute the Stereo Out. Its indicator lights up when the
Stereo Out is on. See “Muting the Stereo Out (ON/OFF)” on page 74 for more informa-
tion.
D Fader
This 100 mm touch-sensitive motorized fader is used exclusively to adjust the level of
the Stereo Out. See “Setting the Stereo Out Level” on page 74 for more information. It
can be grouped with other Output Channel faders for simultaneous operation. See
“Grouping Output Channel Faders” on page 106 for more information. It can also be
used to select the Stereo Out, see “Auto Channel Select & Touch Sense Select” on
page 34, or to punch the Stereo Out in and out during Automix recording. See “Punch-
ing In & Out Individual Parameters” on page 156 for more information.
MASTER25 48
REMOTE1 24
LAYER
2
3
1
ON
SEL
AUTO
70
60
50
40
30
20
15
10
5
0
STEREO
STEREO
3
2
1
4