Yamaha 02R96 Selecting Display Pages, Display Parameter Boxes, Parameter Windows

Selecting Display Pages 31

02R96—Owner’s Manual

Selecting Display Pages

Display pages are grouped by function, and each group of pages can be selected by

using the following [DISPLAY] buttons: AUX SELECT, ENCODER MODE,

EFFECTS/PLUG-INS, ROUTING, DYNAMICS, PAN/SURROUND, EQUAL-

IZER, SCENE MEMORY, USER DEFINED KEYS, MACHINE CONTROL, MON-

ITOR. Further page groups can be selected by using the DISPLAY ACCESS buttons.

• The next page in the group can be selected by pressing the [DISPLAY] button.

• Previous pages can be selected by pressing and holding down the [DISPLAY] button.

• The ﬁrst page in the group can be selected by double-clicking the [DISPLAY] button.

• Pages whose tabs are currently displayed can be

selected by using the F1–F4 buttons.

If there are more pages available than the four whose

tabs are currently displayed, depending on whether they

are located to the left or right, either the left or right Tab

Scroll arrow appears. Pressing either the Left or Right

Tab Scroll button displays the tabs of these pages, which

can then be selected by using the F1–F4 buttons.

When parameters are divided among several pages, for example, the Input Channel Atten-

uators, which are divided among three pages, the page containing the parameter for the cur-

rently selected channel is selected automatically when channels on different Layers are

selected. For example, if the Input Channel 1–24 Attenuator page is currently selected, and

then you select, say, Input Channel #25 by using the LAYER [25–48] button and [SEL] but-

ton #1, the Input Channel 25–48 Attenuator page is selected automatically.

The currently selected page in a group, and the parameter selected on that page, are remem-

bered when you select another group of pages, so when you return to that group, by press-

ing its [DISPLAY] button, that page is displayed with the same parameter selected.

The Auto Display preferences can be set so that certain pages appear automatically when a

corresponding control is adjusted. For example, if the “Auto EQUALIZER Display” prefer-

ence is on, the EQ page appears automatically when a SELECTED CHANNEL EQUAL-

IZER control is operated. See page 197 for information on the Auto Display preferences.

Display Parameter Boxes

Operation of the various buttons, rotary controls, and faders that

appear on the display pages is straightforward. The only items that

require a special mention are the parameter boxes, such as the

INSERT POSITION, OUT, and IN parameter boxes shown here.

Operation of these boxes consists of two steps. First you select a value,

typically by using the Parameter wheel or INC/DEC buttons. Second

you conﬁrm your selection, while the value is ﬂashing, by pressing the

[ENTER] button. If you select another parameter while the value is

still ﬂashing, it remains unchanged.

Parameter Windows

When a rotary control in the SELECTED CHANNEL section is operated, if the

corresponding parameter does not appear on the currently selected page, a

parameter window like the one shown here is displayed while the control is

adjusted. If the control is not adjusted for awhile, the window closes automat-

ically. If the Auto Display preference for the adjusted parameter is on, the page containing