6Chapter 2—Control Surface & Rear Panel
02R96—Owner’s Manual
D SOLO buttons
These buttons are used to solo Channels. The [SOLO] button indicators of channels that
are soloed light up. See “Soloing Channels” on page 102 for more information.
E ON buttons
These buttons are used to mute Input and Output Channels. Their exact operation depends
on the currently selected Layer. The [ON] button indicators of channels that are on light up.
F Channel faders
These 100 mm touch-sensitive motorized faders are used to set the levels of Input Channels,
Bus Outs, and Aux Sends. Their exact operation depends on the currently selected Fader
mode and Layer. See “Selecting Fader Modes” on page 35 for more information. Faders can
be grouped for simultaneous operation. See “Grouping Input Channel Faders” on page 65
and “Grouping Output Channel Faders” on page 106 for more information.
Faders can also be used to select Input and Output Channels. See “Auto Channel Select &
Touch Sense Select” on page 34 for more information. They can also be used to punch chan-
nels in and out during Automix recording. See “Punching In & Out Individual Parameters”
on page 156 for more information.
AUX SELECT
A AUX SELECT DISPLAY button
This button is used to select the following pages: Aux Send, Aux Send Pan, and Input Chan-
nel Aux View. See “Aux Sends” on page 79 for more information.
B AUX 1–8 buttons
These buttons are used to select Aux Sends when sending Input Channel signals to Aux
Sends. The button indicator of the currently selected Aux Send lights up. If the currently
selected Aux Send is paired, the indicator of its partner flashes. See “Aux Sends” on page 79
for more information. These buttons can also be used to pair Aux Sends. See “Pairing Chan-
nels” on page 104 for more information.
ENCODER MODE
A ENCODER MODE DISPLAY button
This button is used to select the Encoder Mode Assign page. See “Selecting Encoder Modes”
on page 36 for more information.
B PAN button
This button is used to select the Pan Encoder mode. Its indicator lights up when this mode
is selected. In this mode, the Encoders function as Pan controls while an Input Channel
Layer is selected. While the Master Layer is selected, Encoders 1–8 function as Input Chan-
nel 49–56 Pan controls, and Encoders 9–24 are inactive. See “Selecting Encoder Modes” on
page 36 for more information.
2
AUX2AUX1AUX 3AUX 4
AUX6AUX5AUX 7AUX 8
AUXSELECT
DISPLAY
1
4
AUXPA N ASSIGN2ASSIGN1
ENCODER MODE
DISPLAY
23
1