Editing Events Offline 159
02R96—Owner’s Manual
TRIM EDIT: These parameters are used to specify the TRIM IN and TRIM OUT times and
the trim level, which can be set in 0.5 dB steps. The TRIM IN parameter determines the
time in which the fader level must achieve the specified trim amount. The TIME SETTING
IN point determines the point at which trimming starts.
The TRIM OUT time determines the time from which the Fader level can start returning to
the previous level. The TIME SETTING OUT point determines the point at which trim-
ming ends.
PARAM: Pressing this button opens the
PARAMETERS window, which is used to specify
which parameters will be erased, copied,
moved/merged, or trimmed. A parameter is
selected when its button appears highlighted.
Multiple parameters can be specified. You can
select all parameters by double-clicking any
parameter button. A confirmation message
appears and you can select one or all parameters.
ERASE button: This button is used to erase the specified Automix data. Use the channel
buttons to select the source channels. Use the IN and OUT parameters to specify the region
to be erased. Use the PARAMETERS window to specify which Automix events are to be
erased. Then select the ERASE button and press [ENTER].
Button Events
FADER Channel Fader events (Inputs Channels, Bus Out masters, Aux Send masters,
and the Stereo Out)
ON Channel Mute events
PAN Input Channel pan events
SURR Input Channel surround pan, LFE level, and DIV parameter events
EQ Channel EQ events
LIB
CH Channel library recall events
GATE Gate library recall events
COMP Comp library recall events
EQ EQ library recall events
SCENE Scene recall events
FX LIB 1–4Effects library recall events of each internal effects processor
AUX 1–8Level events of each Aux Send
ON 1–8Mute events of each Aux Send
REMOTE 1 User Defined Remote Layer events
EFFECT 1–4Parameter events for each internal effects processor
PLUG-IN 1–4Parameter events for each Plug-In
TRIM IN TRIM OUT Time
Existing data
Trim : –
x
dB
IN OUT
Trimmed data