76 Chapter 9Bus Outs
02R96—Owner’s Manual
9 Bus Outs
Patching Bus Outs to Outputs
Bus Outs can be patched to the Slot Outputs, Omni Outs, or the 2TR Digital Outputs. See
“Output Patching” on page 54 for more information.
Routing Input Channels to Bus Outs
Input Channels can be routed to the Bus Outs. See “Routing Input Channels” on page 66
for more information.
Metering Bus Outs
Bus Out signal levels can be metered on the Meter pages. See “Metering” on page 87 for
more information.
Monitoring Bus Outs
Bus Outs can be assigned to the CONTROL ROOM [ASSIGN 1] or [ASSIGN 2] button for
monitoring. See “Control Room Monitoring” on page 114 for more information.
Attenuating Bus Outs
Bus Out signals can be attenuated pre-EQ. See “Attenuating Signals” on page 90 for more
information.
EQing Bus Outs
Each Bus Out features 4-band parametric EQ. See “Using EQ” on page 91 for more infor-
mation.
Grouping Master EQs
Bus Out EQs can be grouped with the EQs of other Output Channels. See “Grouping Out-
put Channel EQs” on page 94 for more information.
Bus Out Inserts
Internal effects processors and external signal processors can be patched into the Bus Outs
by using the Inserts. See “Using Inserts” on page 95 for more information.
Compressing Bus Outs
Signal dynamics can be controlled by using the Bus Out Compressors. See “Compressing
Channels” on page 97 for more information.
Grouping Master Compressors
Bus Out Compressors can be grouped with the Compressors of other Output Channels. See
“Grouping Output Channel Compressors” on page 100 for more information.