70 Chapter 7Input Channels
02R96—Owner’s Manual

Using the Joystick

1Use the LAYER buttons to select the Layers, and use the [SEL] buttons to
select the Input Channels.
2Press the [GRAB] button to grab the current Joystick position, and then use
the Joystick to set the surround pan.
The [GRAB] button, which is enabled only when a Surround mode other than Stereo is
selected, is used to turn on and off Joystick surround pan control for the currently selected
Input Channel. While Grab is on, the Joystick can be used to set the surround pan position
of the currently selected Input Channel. If the Joystick is set to control effects (i.e., the
[EFFECT] button indicator is lit), the [GRAB] button is disabled.

Selected Channel Surround Edit Page

Surround pan settings can be viewed and set on the Input Channel Surround Edit page. If
the Auto PAN/SURROUND Display preference is on, and a Surround Pan mode other than
Stereo is selected, this page appears automatically when a PAN/SURROUND control other
than the [EFFECT] button is operated. See “Auto PAN/SURROUND Display” on page 197.
1Use the SELECTED CHANNEL PAN/SURROUND [DISPLAY] button to select
the Surround Edit page.
2Use the LAYER buttons to select the Layers, and use the [SEL] buttons to
select the Input Channels.
The Surround Edit page displays surround pan parameters for the currently selected Input
Channel and its horizontal or vertical partner. The current surround pan position of each
Input Channel is indicated by a small circle. It’s also indicated numerically next to each
Input Channel number, for example, “CH1 (L9, R10).
The graph of the currently selected Input Channel displays a small square, which indicates
the current position of the Joystick. If the Auto Grab preference is on (see page 198), when
the Joystick is moved to the current surround pan position, the Joystick kicks in as surround
pan control and the small square disappears.
The number of speaker icons and meters around the surround graph depends on the cur-
rently selected Surround mode. The meters indicate Bus Out signal levels.
LINK GRAB EFFECT
LEVEN
R
LR
PAN/ SURROUND
DISPLAY
ODD