Yamaha 02R96 Grouping Input Channel Compressors, Delaying Input Channels, Muting Input Channels (ON/OFF)

Grouping Input Channel Compressors 63
02R96—Owner’s Manual
Grouping Input Channel Compressors
Input Channel Compressors can be grouped, allowing you to control the compression of
several Input Channels simultaneously by operating any Compressor control in the group.
There are four Input Channel Compressor groups: i, j, k, and l.
1Use the DISPLAY ACCESS [GROUP] button to locate the Input Comp Link
page.
2Use the LAYER buttons to select the Layers.
The corresponding group row is selected as each Layer is selected.
3Use the Up/Down cursor buttons to select Comp groups i–l.
The selected group is highlighted by a flashing cursor box.
4Use the [SEL] buttons to add and remove Input Channels to and from the
selected group.
The Compressor settings of the first Input Channel added to the group are applied to all
subsequently added Input Channels.
When an Input Channel is added to a group, its [SEL] button indicator lights up.
If an Input Channel Compressor’s Stereo Link option is on, it’s turned off when that Input
Channel is added to a Comp group.
Delaying Input Channels
Each Input Channel features a Delay function. See “Delaying Channel Signals” on page 101
for more information.
Muting Input Channels (ON/OFF)
Input Channels can be muted as follows.
1Use the LAYER buttons to select the Layers.
2Use the [ON] buttons to mute the Input Channels.
The [ON] button indicators of channels that are on are lit.
ON