58 Chapter 6Input & Output Patching
02R96—Owner’s Manual
Patching with the Encoders
The following patches can be made by using the Encoders: Input Channel Inputs, Insert
Outs, Insert Ins, and Direct Outs.
1Assign one of the above parameters to an Encoder ASSIGN button, as
explained on page 37.
2Press the ASSIGN button to which you assigned the patch parameter.
3Use the Encoders to select ports, and press the Encoder push switches to set
them.
The coresponding Patch page appears when an Encoder is operated. If you operate another
Encoder, the selection is cancelled and the patch is left unchanged.