286 Appendix C: MIDI
02R96—Owner’s Manual
Refer to the above table for the Functions and Numbers.

12.3.17 Parameter change (Function call: Scene/Library

Clear)

Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches
the device number included in the SUB STATUS.
This is echoed if [Parameter change ECHO] is ON.
When this is received, the specified memory/library will be stored/recalled.
Transmission
If [Parameter change ECHO] is ON, this message will be retransmitted
without change.

12.3.18 Parameter change (Function call: pair, copy)

Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches
the device number included in the SUB STATUS. This is echoed if [Param-
eter change ECHO] is ON.
When this is received, pairing will be enabled/disabled for the specified
channel. (Items other than PAIR are reserved for future use.)
*1)0:CH1 - 55:CH56, 128:BUS1 - 135:BUS8, 256:AUX1 -
263:AUX8, 512:STEREO L - 513:STEREO R
Effect is 0:Effect 1–3:Effect 4
In the case of PAIR, you must specify channels for which pair-
ing is possible.
In the case of PAIR ON with COPY, you must specify Source
Channel as the copy source, and Destination Channel as the
copy destination.

12.3.19 Parameter change (Function call Event: Effect)

Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches
the device number included in the SUB STATUS.
This is echoed if [Parameter change ECHO] is ON.
When this is received, the corresponding effect’s function activates (de-
pending on the effect type).
• This does not activate when the effect type is different.

12.3.20 Parameter change (Key remote)

Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches
the device number included in the SUB STATUS.
This is echoed if [Parameter change ECHO] is ON.
When this is received, the same processing that is executed when the key
specified by Address is pressed (released). (Refer to the PARAMETER
CHANGE PARAMETER NUMBER LIST.)
Transmission
If [Parameter Change ECHO] is ON, this message is retransmitted without
change.

12.3.21 Parameter change (Remote Meter)

When transmission is enabled by receiving a Request of Remote meter, the
specified meter information is transmitted every 50 msec for 10 seconds.
When you want to transmit meter information continuously, a Request
must be transmitted continuously within every 10 seconds.
Reception
This is echoed if [Parameter change ECHO] is ON.
Transmission
When transmission has been enabled by a Request, the parameter specified
by Address (see PARAMETER CHANGE PARAMETER NUMBER LIST)
will be transmitted on the [Rx CH] channel at 50 msec intervals for a du-
ration of 10 seconds.
Transmission will be disabled if the power is turned off and on again, or if
the PORT setting is changed.
If [Parameter Change ECHO] is ON, this message is retransmitted without
STATUS 11110000 F0 System exclusive message
ID No. 01000011 43 Manufacture's ID number (YAMAHA)
SUB STATUS 0011nnnn 3n n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E MODEL ID (digital mixer)
MODEL ID 00000110 7F Universal
ADDRESS 00010000 10 Function call Library
0100aaaa 4a Address UL (function)
0nnnnnnn nn Address LU (number H)
0nnnnnnn nn Address LL (number L)
EOX 11110111 F7 End of exclusive
STATUS 11110000 F0 System exclusive message
ID No. 01000011 43 Manufacture's ID number (YAMAHA)
SUB STATUS 0001nnnn 1n n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E MODEL ID (digital mixer)
MODEL ID 00000110 7F Universal
ADDRESS 00010000 10 Function call Library
0110aaaa 6a Address UL (function)
0nnnnnnn nn Address LU (number H)
0nnnnnnn nn Address LL (number L)
EOX 11110111 F7 End of exclusive
function number
SCENE LIB CLEAR 0x60 1-99
EQ LIB CLEAR 0x61 41-200
GATE LIB CLEAR 0x62 5-128
COMP LIB CLEAR 0x63 37-128
EFF LIB CLEAR 0x64 1-128
CHANNEL LIB CLEAR 0x66 2-128
INPATCH LIB CLEAR 0x67 0-32
OUTPATCH LIB CLEAR 0x68 0-32
Bus to Stereo LIB CLEAR 0x69 0-32
Surround Monitor LIB CLEAR 0x6A 0-32
AUTOMIX LIB CLEAR 0x6B 1-16
STATUS 11110000 F0 System exclusive message
ID No. 01000011 43 Manufacture's ID number (YAMAHA)
SUB STATUS 0001nnnn 1n n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E MODEL ID (digital mixer)
MODEL ID 00000110 7F Universal
ADDRESS 00010001 11 Function call Pair
0000aaaa 0a Function
DATA 0ddddddd dd Source channel number H
0ddddddd dd Source channel number L
0ddddddd dd Destination channel number H
0ddddddd dd Destination channel number L
EOX 11110111 F7 End of exclusive
function Channel
PAIR ON with COPY 0x00 *1)
PAIR ON with RESET BOTH 0x01 *1)
PAIR OFF 0x02 *1)
STATUS 11110000 F0 System exclusive message
ID No. 01000011 43 Manufacture's ID number (YAMAHA)
SUB STATUS 0001nnnn 1n n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E MODEL ID (digital mixer)
MODEL ID 00000110 7F Universal
ADDRESS 00010010 12 Function call Event
0000aaaa 0a Function
DATA 00000000 00 -
0ddddddd dd Release:0, Press:1
00000000 00 -
0ddddddd dd Destination Effect Number 0 - 7
EOX 11110111 F7 End of exclusive
function Channel
Freeze Play button 0x00 0:Effect1-3:Effect4
Freeze Record button 0x01 0:Effect1-3:Effect4
Auto Pan 5.1 Trigger Button 0x02 0:Effect1
Auto Pan 5.1 Reset Button 0x03 0:Effect1
STATUS 11110000 F0 System exclusive message
ID No. 01000011 43 Manufacture's ID number (YAMAHA)
SUB STATUS 0001nnnn 1n n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E MODEL ID (digital mixer)
MODEL ID 00001011 0B 02R96
ADDRESS 00100000 20 Address UU
0aaaaaaa aa Address UL
0aaaaaaa aa Address LU
0aaaaaaa aa Address LL
DATA 0ddddddd dd 0:press, 1:release
EOX 11110111 F7 End of exclusive