Stereo Out 73
02R96—Owner’s Manual
8 Stereo Out
Stereo Out Connectors
The Stereo Out is output by the STEREO OUT +4 dB (BAL) balanced
XLR-3-32-type connectors and the STEREO OUT –10 dBV (UNBAL)
unbalanced phono connectors.
Patching the Stereo Out to Outputs
The left and right channels of the Stereo Out can be patched to the Slot Outputs, Omni
Outs, or the 2TR Digital Outputs. See “Output Patching” on page 54 for more information.
Routing Input Channels to the Stereo Out
Input Channels can be routed and panned to the Stereo Out. See “Routing Input Channels”
on page 66 for more information.
Sending Bus Outs to the Stereo Out
Bus Out signals can be sent to the Stereo Out. See “Sending Bus Outs to the Stereo Out” on
page 78 for more information.
Metering the Stereo Out
Stereo Out signal levels can be metered on the Meter pages. See “Metering” on page 87 for
more information.
Monitoring the Stereo Out
The Stereo Out can be monitored via the CONTROL ROOM MONITOR OUTs and the
PHONES (see page 114) or the STUDIO MONITOR OUT (see page 115).
Attenuating the Stereo Out
Stereo Out signals can be attenuated pre-EQ. See “Attenuating Signals” on page 90 for more
information.
EQing the Stereo Out
The Stereo Out features 4-band parametric EQ. See “Using EQ” on page 91 for more infor-
mation.
Grouping Master EQs
The Stereo Out EQ can be grouped with the EQs of other Output Channels. See “Grouping
Output Channel EQs” on page 94 for more information.