138 Chapter 15—Scene Memories
02R96—Owner’s Manual
15 Scene Memories

About Scene Memories

Scene memories allow you to store a snapshot of virtually every 02R96 mix setting in a
Scene. There are 99 Scene memories, and they can be titled for easy identification. Scenes
can be linked to Input and Output Patch library memories, so that input and output
patches are recalled along with Scenes. A fade time of up to 30 seconds can be set individu-
ally for each Input and Output Channel fader. Recall Safe can be used to exclude individual
Input and Output Channels and certain parameters from Scene recalls. Stored Scenes can
be sorted as necessary.
Scenes can be stored and recalled by using the SCENE MEMORY [STORE] and [RECALL]
buttons, or by using the Scene Memory page. Scenes can be assigned MIDI Program
Change numbers and recalled remotely. See “Assigning Scenes to Program Changes” on
page 166 for more information. When a Scene is recalled on the 02R96, the Program
Change number assigned to that Scene is transmitted, which can be used to recall programs,
effects, etc., on other MIDI equipment. In addition, manual Scene recalls can be recorded
on-the-fly in an Automix. When that Automix is replayed, the Scenes are recalled automat-
ically. See “Automix” on page 145 for more information.
Scene memories can be stored to external MIDI device, such as a MIDI data filer, by using
MIDI Bulk Dump (see page 168).
What’s Stored in a Scene?
The following items are stored in Scenes: Input and Output Channel settings, Effects set-
tings, Group and Pair settings, Fade Time settings, and Scene title.
Edit Buffer & Edit Indicator
The Edit Buffer is where the current mix settings (i.e., the current Scene) are stored. When
a Scene is stored, the mix settings in the Edit Buffer are written to the selected Scene mem-
ory. When a Scene is recalled, the contents of the selected Scene memory are copied to the
Edit Buffer, making them the current mix settings.
When a parameter is adjusted after a Scene has been recalled, the Edit indicators—the dot
on the SCENE MEMORY display and “EDIT” on the display—appear, indicating that the
current mix settings (i.e., those in the Edit Buffer) no longer match those of the Scene that
was recalled last, as illustrated below.
The contents of the Edit Buffer are retained while the 02R96 is turned off.
Scene #2 has just been recalled, so the
contents of the Edit Buffer match those of
Scene #2 and the Edit indicators are off.
A parameter has been adjusted since Scene #2
was recalled, so the Edit indicators appear,
indicating that the contents of the Edit Buffer
no longer match those of Scene #2.

02 02

SCENE MEMORY display
Display