Effects Parameters 229

02R96—Owner’s Manual
PHASER

Two input, two output 16-stage phaser.

AUTOPAN

Two input, two output autopanner.

Parameter Range Description
FREQ. 0.0540.00 Hz Modulation speed
DEPTH 0100% Modulation depth
FB. GAIN 99 to +99% Feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
OFFSET 0100 Lowest phase-shifted frequency offset
PHASE 0.00354.38 degrees Left and right modulation phase balance
STAGE 2, 4, 6, 8, 10, 12, 14, 16 Number of phase shift stages
LSH F 21.2 Hz8.00 kHz Low shelving lter frequency
LSH G 12 to +12 dB Low shelving lter gain
HSH F 50.0 Hz16.0 kHz High shelving lter frequency
HSH G 12 to +12 dB High shelving lter gain
SYNC OFF/ON Tempo parameter sync on/off
NOTE 1
1.
Used in conjunction with TEMPO to determine FREQ.
Parameter Range Description
FREQ. 0.0540.00 Hz Modulation speed
DEPTH 0100% Modulation depth
DIR. 1
1. L<->R, L>R, L<R, Turn L, Turn R
Panning direction
WAVE Sine, Tri, Square Modulation waveform
LSH F 21.2 Hz8.00 kHz Low shelving lter frequency
LSH G 12 to +12 dB Low shelving lter gain
EQ F 100 Hz8.00 kHz EQ (peaking type) frequency
EQ G 12 to +12 dB EQ (peaking type) gain
EQ Q 10.00.10 EQ (peaking type) bandwidth
HSH F 50.0 Hz16.0 kHz High shelving lter frequency
HSH G 12 to +12 dB High shelving lter gain
SYNC OFF/ON Tempo parameter sync on/off
NOTE 2
2.
Used in conjunction with TEMPO to determine FREQ.