Effects Parameters 243

02R96—Owner’s Manual
DIST->DELAY

One input, two output distortion and delay effects in series.

MULTI FILTER

Two input, two output 3-band multi-filter (24 dB/octave).

Parameter Range Description
DST TYPE DST1, DST2, OVD1,
OVD2, CRUNCH Distortion type (DST = distortion, OVD = overdrive)
DRIVE 0100 Distortion drive
MASTER 0100 Master volume
TONE 10 to +10 Tone control
N. GATE 020 Noise reduction
DELAY 0.02725.0 ms Delay time
FB. GAIN 99 to +99% Feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
HI. RATIO 0.11.0 High-frequency feedback ratio
FREQ. 0.0540.00 Hz Modulation speed
DEPTH 0100% Modulation depth
DLY BAL 0100% Distortion and delay balance (0% = all distortion, 100% = all
delayed distortion)
SYNC OFF/ON Tempo parameter sync on/off
DLY NOTE 1
1. (Maximum value depends on
the tempo setting)
Used in conjunction with TEMPO to determine DELAY
MOD NOTE 2
2.
Used in conjunction with TEMPO to determine FREQ.
Parameter Range Description
TYPE 1 HPF, LPF, BPF Filter 1 type: high pass, low pass, band pass
TYPE 2 HPF, LPF, BPF Filter 2 type: high pass, low pass, band pass
TYPE 3 HPF, LPF, BPF Filter 3 type: high pass, low pass, band pass
FREQ. 1 28 Hz16.0 kHz Filter 1 frequency
FREQ. 2 28 Hz16.0 kHz Filter 2 frequency
FREQ. 3 28 Hz16.0 kHz Filter 3 frequency
LEVEL 1 0100 Filter 1 level
LEVEL 2 0100 Filter 2 level
LEVEL 3 0100 Filter 3 level
RESO. 1 020 Filter 1 resonance
RESO. 2 020 Filter 2 resonance
RESO. 3 020 Filter 3 resonance