Remote control features

■Programming macro operations

You can program your own macro to transmit several remote control commands in sequence at the press of a button. Be sure to set up remote control codes or perform learning operations before programming the macro.

Notes

•The default macro is not cleared when a new macro is programmed for a button. The default macro can be used again when the programmed macro is cleared.

•It is not possible to add a new signal (macro step) to the default macro. Programming a macro changes all macro contents.

•We do not recommend that you program continuous operations (for example, volume control) in a macro.

1Press FSETUP using a ballpoint pen or similar object.

“SETUP” appears in the display window (4).

2Press 8k / n repeatedly to select “MACRO” and then press 8ENTER.3Press the desired macro button you want toassign the macro program to and then press

8ENTER.

“M:the three-letter name of the selected macro button” (for example, “M:DVD”) and the name of the currently selected control area appears in the display window (4) alternately.

When you press CSTANDBY or DPOWER, “M:STB” or “M:PWR” and the name of the currently selected control area appears in the display window (4) alternately.

4Press the buttons for the functions you want to include in the macro operation in sequence.

Example

Set the input source to DVD → Turn on the DVD player → Turn on the video monitor

Step 1 (“MCR1”): Press DVD.Step 2 (“MCR2”): Press AV POWER.Step 3 (“MCR3”): Press TV POWER.

POWER POWER STANDBY POWER

TV AV

3 2

MULTI V-AUX PHONO DOCK

BD

DVD

CD

MD

HD DVD

CD-R

 

 

1

CBL

TV

DVR

VCR

SAT

 

 

 

TUNER

XM

SIRIUS

A

Indicates the number of macro MCR 1 steps entered

M:DVD (Selected macro button)

Flashes alternately so you can set the next step

DVD (Selected control area)

Notes

•To change the selected input area, press 5SELECT l/ h. Pressing the input selector buttons will program a macro step, whereas 5SELECT l/ honly changes the selected input area.

•The position of the operation mode selector (AMP/TV/ SOURCE) affects the assigned function. When the operation mode selector is set to EAMP or ETV, the input source selectors do not function.

5Press GMACRO to confirm the program.

You can set up to 10 steps (10 functions). After you have set 10 steps, “FULL” appears and the remote control automatically exits from the macro programming mode.

6Press FSETUP again to exit from the setup mode.

Note

“ERROR” appears in the display window (4) if you press more than one button simultaneously.

96 En