Yamaha RX-V1900BL 78 En, 3 SOUND MENU, +16.5 dB, PRNS R, SWFR, Control step: 5.0 dB, Control step: 0.5 dB, Maximum volume MAX VOL, ■Equalizer A)EQUALIZER

Customizing this unit (MANUAL SETUP)

Muting type MUTING TYPE

Use this feature to adjust how much the mute function reduces the output volume (page 37).

Choice	Functions

FULL	Mutes all the audio output.

–20dB	Reduces the current volume by 20 dB.

Maximum volume MAX VOL.

Use this feature to set the maximum volume level in the main zone. This feature is useful to avoid the unexpected loud sound by mistake. For example, the original volume range is –80.0 dB to +16.5 dB. However, when “MAX VOL.” is set to –5.0 dB, the volume range becomes –80.0 dB to –5.0 dB.

Control range: –30.0 dB to +15.0 dB, +16.5 dBControl step: 5.0 dB

Notes

•When this unit is in the automatic setup procedure, the volume level is automatically set to 0 dB regardless of the current “MAX VOL.” setting.

•The “MAX VOL.” setting takes priority over the “INIT. VOL.” setting.

Initial volume INIT. VOL.

Use this feature to set the volume level of the main zone when the power of this unit is turned on.

Choices: OFF, MUTE, –80.0 dB to +16.5 dBControl step: 0.5 dB

Note

The “MAX VOL.” setting takes priority over the “INIT. VOL.” setting.

3 SOUND MENUUse this feature to adjust the audio parameters.■Equalizer A)EQUALIZERUse this feature to select the parametric equalizer or the graphic equalizer.Equalizer type select EQ TYPEUse this feature to select the type of equalizer.

Choice	Functions

AUTO PEQ	Uses the parametric equalizer adjusted in the
	automatic setup procedure.

GEQ	Uses the equalizer settings adjusted in "GEQ
	EDIT".

OFF	Deactivates the equalizing feature.

Note

“AUTO PEQ” is available only after you have done the automatic setup procedure (page 30).

Graphic equalizer edit GEQ EDIT

Use this feature to adjust the tonal quality of each channel. Speaker channel: FRONT L, FRONT R, CENTER,

SUR. L, SUR. R, SB L, SB R, PRNS L,PRNS R, SWFRFrequency band: 63 Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz,6.3kHz, 16 kHz Control range: –6.0 dB to +6.0 dB Control step: 0.5 dB

To output a test tone while adjusting the tonal quality, set “TEST” to “ON”.

Notes

•“GEQ EDIT” is available only when “EQ TYPE” is set to “GEQ”.

•The available speaker channels differ depending on the “CONFIG” setting.

•Instead of “SB L” and “SB R”, “SB” is displayed if “SUR.B L/ R SP” is set to either “SMLx1” or “LRGx1”.