Yamaha RX-V1900BL 103 En, BI-AMP, SIRIUS PIN, INITIALIZE, MONITOR CHECK, TUNER FRQ STEP, ■Bi-amplifiermode BI-AMP, (Asia and General models only)

Press FID repeatedly using a ballpoint pen or similar object on the remote control to select the desired remote control ID.

Each time you press FID, the remote control ID indicator changes as shown below.

ID1

ID

ID2

y

To set the remote control ID of the simplified remote control, see page 98 for details.

■SIRIUS Satellite Radio Parental Lock code number reset SIRIUS PIN(U.S.A. and Canada models only)

Use this feature to set the code number for the SIRIUS Satellite Radio Parental Lock feature to the initial factory setting.

ChoiceDescriptions

RESET Sets the code number to the initial factory setting.

CANCEL Cancels the reset of the code number.

■Tuner frequency step TUNER FRQ STEP

(Asia and General models only)

Use this feature to set the tuner frequency step according to the frequency spacing in your area.

Choice	Descriptions
AM10/	Select this setting for North, Central and South
FM100	America.
AM9/FM50	Select this setting for all other countries.

■Bi-amplifier mode BI-AMPUse this feature to activate or deactivate the bi-amplifier function.

Choice	Descriptions
ON	Select this setting if you want to activate the bi-
	amplifier function.
OFF	Select this setting if you want to deactivate the bi-
	amplifier function.

Advanced setup

■Parameter initialization INITIALIZE

Use this feature to reset the parameters of this unit to the initial factory settings. You can select the category of parameters to be initialized.

Choice	Descriptions
DSP	Select this setting to initialize all the parameters of
PARAM	the sound field parameters (page 67).
VIDEO	Select this setting to initialize all the parameters in
	“VIDEO MENU” and “OSD SHIFT” and “GRAY
	BACK” in “DISPLAY SET”.
ALL	Select this setting to initialize all the parameters of
	this unit.
CANCEL	Select this setting to cancel the initialization
	procedure.

y

To initialize the parameters of each sound field program, use "INITIALIZE" in the sound field program menu (page 67).

■ HDMI monitor check MONITOR CHECK

Use this feature to activate or deactivate the monitor check function of this unit.

Choice	Descriptions
YES	This unit receives the information of the available
	video signal resolutions from the video monitor
	connected via HDMI and you can only select the
	resolutions supported by the video monitor in
	“HDMI RES.” (page 81).
SKIP	You can select any resolution in “HDMI RES.”
	(page 81).

OPERATION ADVANCED

Note

When “BI-AMP” is set to “ON”, the SURROUND BACK terminals cannot be used to connect surround back speakers in that the terminals are already used for the bi-amplifier connection (page 15).

English

103 En