Yamaha RX-V1900BL 45 En, Using CINEMA DSP 3D mode, Enjoying unprocessed input sources, BASIC, English, STRAIGHT, STRAIGHT, OPERATION, To deactivate the “STRAIGHT” mode

		Sound field programs

Before performing the following operation, set the operation		Before performing the following operation, set the operation
mode selector on the remote control to EAMP.		mode selector on the remote control to EAMP.

Using CINEMA DSP 3D mode

CINEMA DSP 3D mode creates the intensive and accurate stereoscopic sound field in the listening room. You can activate and deactivate the CINEMA DSP 3D mode.

Press O3D DSP repeatedly to turn on or off the CINEMA DSP 3D mode.

While this unit is in the CINEMA DSP 3D mode, the 3D indicator lights up.

Note

CINEMA DSP 3D does not activate (“3D:--“ appears) in the following cases:

–the “PRESENCE SP” setting is set to “NONE” (page 76).

–no CINEMA DSP is selected.

–headphones are connected to the PHONES jack.

Enjoying unprocessed input sources

When this unit is in the “STRAIGHT” mode, 2-channel stereo sources are output from only the front left and right speakers. Multi-channel sources are decoded straight into the appropriate channels without any additional effect processing.

Press OSTRAIGHT (or RSTRAIGHT) to select “STRAIGHT”.

The names of the audio signal format of the input source and the active decoder appear in the front panel display.

To deactivate the “STRAIGHT” mode

Press OSTRAIGHT (or RSTRAIGHT) again or select another sound field program (page 39).

OPERATION	BASIC

English