Playback
Caution
Extreme caution should be exercised when you play back CDs encoded in DTS. If you play back a CD encoded in DTS on a
y
To play
Before performing the following operations, set the operation mode selector on the remote control to EAMP.
Basic procedure
1Turn on the video monitor connected to this unit.
y
You can configure the display settings with "VIDEO MENU" (page 80) and “DISPLAY SET” (page 83).
2Rotate the CINPUT selector (or press one of the input selector buttons (3))The name of the selected input source appears for a few seconds.Available input sources
DOCK | TV CD PHONO MULTI CH TUNER XM SIRIUS |
D V D
4Rotate QVOLUME (or press IVOLUME
y
To adjust the level of each speaker, see page 46.
5Rotate the NPROGRAM selector (or press one of the sound field program selector buttons (P) repeatedly) to select the desired sound field program.
For details about sound field program, see page 39.Selected sound field program category
M o v i eS c i - F iSelected sound field program
y
To switch the information (current input source, current sound field program, etc) displayed in the front panel display, press LINFO (or set the operation mode selector to EAMP and press BINFO) repeatedly.
OPERATION | BASIC |
|
|
Selected input source
English