Customizing this unit (MANUAL SETUP)
The “MANUAL SETUP” menu allows you to manually adjust speaker and system parameters using the remote control. For the complete menu structure, see “SET MENU tree” (page 123).
y
The initial factory settings are indicated in bold under each parameter.
Operating the MANUAL SETUP menu
This section explains how to configure parameters in the MANUAL SETUP menu using the OSD.
y
•To return to the previous menu level, press 9RETURN.
•Pressing JPARAMETER cancels the menu operation.
4Press 8k / n repeatedly and then press
8ENTER to select and enter the desired submenu.
As an example, the following screen appears if “LFE LEVEL” is selected.
B)LFE LEVEL
. SPEAKER;;;;;;0dB
1Set the operation mode selector to EAMP and then press HMENU to enter “SET
MENU”.
The top “SET MENU” screen appears in the OSD.
SET MENU
;AUTO SETUP
. ;MANUAL SETUP ;SYSTEM MEMORY ;SIGNAL INFO
[]/[p]: Up/Down
[ENTER]: Enter
[]/[p]: Up/Down
[p]/[[]: Adjust
5Press 8k / n to select the desired parameter and then 8l / h to change the parameter settings.
•To increase the value, press 8h.
•To decrease the value, press 8l.
6 Press HMENU to exit from “SET MENU”.
2Press 8k / n to select “MANUAL SETUP” and then press 8ENTER.
The “MANUAL SETUP” screen appears in the OSD.
MANUAL SETUP
. 1 SPEAKER MENU 2 VOLUME MENU 3 SOUND MENU 4 VIDEO MENU 5 INPUT MENU
6 OPTION MENU
[]/[p]: Up/Down
[ENTER]: Enter
3Press 8k / n repeatedly and then press 8ENTER to select and enter the desired
menu.
As an example, the following screen appears if “SOUND MENU” is selected.
3 SOUND MENU
. A)EQUALIZER
B)LFE LEVEL C)DYNAMIC RANGE D)LIPSYNC E)AUDIO SET F)PURE DIRECT
[]/[p]: Up/Down
[ENTER]: Enter