Remote control features

3Press FSETUP using a ballpoint pen or similar object.“SETUP” appears in the display window (4) on the remote control.

SETUP

Note

In the “SETUP” menu, complete each of the operations within 30 seconds. Otherwise, the remote control automatically exits from the “SETUP” menu.

4Press 8k / n repeatedly to select “P-SET” and then press 8ENTER.

The remote control enters the preset mode. “P-SET” and name of the currently selected control area appears in the display window (4) alternately.

P-SET

5Press an input selector button (3) or5SELECT l / h repeatedly to select the control area you want to customize.If you selected “TV” in step 2, skip this step.

DVD

6Press 8ENTER.The current code setting appears.

04306

7Press the numeric buttons (A) to enter the five-digit remote control code for your component.

8Press 8ENTER to set the number.“OK” appears in the display window (4) if setting was successful.

“NG” appears in the display window (4) if the setting was unsuccessful. In this case, start over from step 5.

OK

y

If you continuously want to set up another code for another control area, repeat steps 5 through 8.

9Press FSETUP again to exit from the “SETUP” mode.

10Press 2AV POWER or 0p to confirm whether you can control your component using the remote control.

y

•If operation is not possible and the manufacturer of your component has more than one code, try each of them until you find the correct one.

•If you set "00012" as the remote control code of the selected control area, you can operate the currently selected internal source (DOCK, TUNER, XM, or SIRIUS).

Notes

•“ERROR” appears in the display window (4) on the remote control if you press a button not indicated in the respective step, or when you press more than one button simultaneously.

•The supplied remote control does not contain all possible codes for commercially available audio and video components (including Yamaha components). If operation is not possible with any of the remote control codes, program the new remote control function using the learning feature (page 93) or use the remote control supplied with the component.

•Functions programmed using the learning mode take priority over remote control code functions.

92 En