DISTANCE | Adjusted speaker |
|
|
FRONT L | Front left speaker |
|
|
FRONT R | Front right speaker |
|
|
CENTER | Center speaker |
|
|
SUR. L | Surround left speaker |
|
|
SUR. R | Surround right speaker |
|
|
SB L | Surround back left speaker |
|
|
SB R | Surround back right speaker |
|
|
SWFR | Subwoofer |
|
|
PRNS L | Presence left speaker |
|
|
PRNS R | Presence right speaker |
|
|
Notes
•The available speaker channels differ depending on the “CONFIG” setting.
•Instead of “SB L” and “SB R”, “SUR.B” is displayed if “SUR.B L/R SP” is set to either “SMLx1” or “LRGx1”.
■Test tone D)TEST TONETurns the test tone output on or off for the “CONFIG”, “LEVEL” and “DISTANCE” settings.
Choice | Functions |
|
|
OFF | This unit does not output the test tone for the |
| “CONFIG”, “LEVEL” and “DISTANCE” |
| settings. |
|
|
ON | This unit outputs the test tone for the |
| “CONFIG”, “LEVEL” and “DISTANCE” |
| settings. |
|
|
y
If you use a handheld sound pressure level meter, hold at arm’s length and point upwards so that the meter is in the listening position. With the meter set to the 70 dB scale and to C SLOW, calibrate each speaker to 75 dB.
Note
This function is automatically turned off if you exit from “SPEAKER MENU”.
Customizing this unit (MANUAL SETUP)
2 VOLUME MENUUse this menu to manually adjust the various volume settings.Adaptive dynamic range controlADAPTIVE DRCUse this feature to adjust the dynamic range in conjunction with the volume level. This feature is useful when you are listening at lower volumes or at night. When “ADAPTIVE DRC” is set to “AUTO”, this unit controls the dynamic range as follows:
–If the VOLUME setting is low: the dynamic range is narrow–If the VOLUME setting is high: the dynamic range is widelevel |
| AUTO |
| level |
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
| AUTO |
| |||
Output |
|
|
| Output |
|
|
| ||
| OFF |
|
|
| OFF |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| Input level |
|
|
|
| Input level | ||
|
| VOLUME: low |
|
|
| VOLUME: high | |||
|
|
|
|
|
|
|
|
| |
Choice |
| Functions | |||||||
|
|
|
|
|
|
|
|
| |
AUTO |
| Adjusts the dynamic range automatically. | |||||||
|
|
|
|
|
|
|
|
| |
OFF |
| Does not adjust the dynamic range automatically. | |||||||
|
|
|
|
|
|
|
|
|
|
y
•You can also adjust the dynamic range of the bitstream signal sources by using “DYNAMIC RANGE” in “SOUND MENU” (page 79).
•This function is also useful for listening with your headphones.
Note
The adaptive dynamic range control feature does not function when this unit is in the Pure Direct mode (page 46).
Adaptive DSP level ADAPTIVE DSP LEVELUse this feature to make fine adjustments of the DSP effect level (page 68) automatically in conjunction with the volume level.
Choice | Functions |
|
|
AUTO | Adjusts the DSP effect level in conjunction with |
| the volume level. |
|
|
OFF | Does not adjust the DSP effect level |
| automatically. |
|
|
Note
Even if you set “ADAPTIVE DSP LEVEL” to “AUTO”, this unit does not change but the
OPERATION | ADVANCED |
|
|
English