Playback

Selecting audio input jacks(AUDIO SELECT)

Use this feature (audio input jack select) to switch the input jack assigned to an input source when more than one jacks are assigned to an input source.

1Rotate the CINPUT selector (or press one of the input selector buttons (3)) to select the desired input source.

2Press DAUDIO SELECT (or set the operation mode to EAMP and then press NAUDIO SEL) repeatedly to select the

desired audio input jack select setting.

Available input sources

 

 

 

 

 

 

 

 

 

 

 

DOCK V-AUX VCR DVR CBL/SAT DVD BD/HD DVD

MD/CD-R TV CD PHONO MULTI CH TUNER XM SIRIUS

 

 

 

 

 

 

A . S E L :

A U T O

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Selected audio input jack

 

 

 

 

select setting

 

 

 

 

 

 

 

 

 

AUTO

Automatically selects input signals in the

 

 

 

following order:

 

 

 

 

 

 

(1) HDMI

 

 

 

 

 

 

(2)

Digital signals

 

 

 

 

 

 

(3)

Analog signals

 

 

 

 

 

 

 

 

 

 

 

 

HDMI

Selects only HDMI signals. When HDMI

 

 

 

signals are not input, no sound is output.

 

 

 

 

 

 

 

 

 

COAX/OPT

Automatically selects input signals in the

 

 

 

following order:

 

 

 

 

 

 

(1)

Digital signals input at the COAXIAL jack.

 

 

 

(2)

Digital signals input at the OPTICAL jack.

 

 

 

When no signals are input, no sound is output.

 

 

 

 

 

 

 

 

 

ANALOG

Selects only analog signals. If no analog

 

 

 

signals are input, no sound is output.

 

 

 

 

 

 

 

 

 

y

You can configure the default audio input jack select setting with “AUDIO SELECT” (page 84).

Note

This feature is not available if no digital input jack is assigned to the selected input source in “I/O ASSIGNMENT” (page 82). “HDMI” is available only when an HDMI input jack is assigned.

Selecting the multi-channel input component

Use this feature to select the component connected to the MULTI CH INPUT jacks (page 23) as the input source.

Rotate the CINPUT selector on the front panel to select “MULTI CH” (or press 3MULTI).

y

You can configure the multi channel input settings with “MULTI CH” (page 81).

Note

Sound field programs cannot be selected when “MULTI CH” is selected as the input source.

Using your headphones

Connect a pair of headphones with a stereo analog audio cable plug to the PHONES jack on the front panel.

PURE DIRECT

VOLUME

INPUT

 

 

 

 

 

 

MAIN ZONE

 

 

 

 

ZONE ON/OFF

ZONE CONTROLS

 

 

MULTI ZONE

 

 

 

 

 

 

 

ZONE 2 ZONE 3

 

ON/OFF

YPAO

SILENT CINEMA

S VIDEO

VIDEO

L AUDIO R

OPTICAL

PROGRAM

OPTIMIZER

 

 

 

 

 

 

MIC

PHONES

 

 

VIDEO AUX

 

ON

OFF

MASTER

y

When you select a sound field program, SILENT CINEMA mode activates automatically (page 44).

Notes

•When you connect headphones, no signals are output at the speaker terminals.

•All digital multi-channel audio signals are mixed down to the left and right headphone channels.

•When “MULTI CH” is selected as the input source, only the signals input at the MULTI CH INPUT FRONT jacks are output.

36 En