Muting the audio output

Press KMUTE on the remote control to mute the audio output. Press KMUTE again to resume the audio output.

y

•The VOLUME level indicator flashes while the mute function is on.

•You can configure the muting level with “MUTING TYPE” (page 78).

Displaying the input source information (SIGNAL INFO)

You can display the format, sampling frequency, channel, bit rate and flag data of the current input signal.

1Set the operation mode selector to EAMP and then press HMENU on the remotecontrol.

The top “SET MENU” screen appears in the OSD.

SET MENU

;AUTO SETUP

. ;MANUAL SETUP ;SYSTEM MEMORY ;SIGNAL INFO

[]/[p]: Up/Down

[ENTER]: Enter

2Press 8n repeatedly to select “SIGNAL INFO” and then press 8ENTER.3Press 8l / h to toggle between the audio and video information.4Press HMENU on the remote control againto exit from “SET MENU”.

Playback

■Audio information
FORMAT

Signal format. When this unit cannot detect a

 

digital signal, it automatically switches to

 

analog input.

 

 

SAMPLING

The number of samples per second taken from

 

a continuous signal to make a discrete signal.

 

 

CHANNEL

The number of source channels in the input

 

signal (front/surround/LFE). For example, a

 

multi-channel soundtrack with 3 front

 

channels, 2 surround channels and LFE, is

 

displayed as “3/2/0.1”.

 

 

BITRATE

The number of bits passing a given point per

 

second.

 

 

DIALOG

The dialogue normalization level preset to the

 

current input bitstream signal.

 

 

FLAG

Flag data encoded in the bitstream, or PCM

 

signals that cue this unit to automatically

 

switch decoders.

 

 

Notes

•“–––” appears when this unit cannot display the corresponding information.

•Some high definition audio bitstream contents may not include the discrete surround back left and right channel signals but are encoded at the bitrate of 192 kHz.

•Even if you make settings to output bitstreams directly, some players convert the Dolby TrueHD or Dolby Digital Plus bitstreams to the Dolby Digital bitstreams, while converting the DTS-HD Master Audio or DTS-HD High Resolution Audio bitstreams to the DTS bitstreams.

■Video information
HDMI SIGNAL

 

Type of the source video signals and

 

 

the video signals output at the HDMI

 

 

OUT jack of this unit.

 

 

 

HDMI RES.

 

Resolution of the input signal (analog

 

 

or HDMI) and the output signal

 

 

(HDMI).

 

 

 

ANALOG RES.

 

Resolution of the source video signals

 

 

and the analog video signals output at

 

 

the COMPONENT MONITOR OUT

 

 

jacks of this unit.

 

 

 

HDMI ERROR

 

Error message for HDMI sources or

(HDMI MESSAGE)

 

connected HDMI devices.

 

 

 

 

 

HDMI error message

 

 

 

Device over

 

The number of the connected HDMI

 

 

components is over the limit.

 

 

 

HDCP Error

 

HDCP authentication failed.

 

 

 

Out of Res.

 

Out of resolution. The connected

 

 

monitor is not compatible with the

 

 

resolution of the input video signal.

 

 

 

OPERATION

BASIC

 

 

English

37 En