Troubleshooting

After AUTO SETUP

Warning message

Cause

Remedy

See

page

 

 

 

 

 

 

 

W-1:OUT OF PHASE

Speaker polarity is not correct. This

 

message may appear depending on the

 

speakers even when the speakers are

 

connected correctly.

Check the speaker connections for proper

13

polarity (+ or –).

 

W-2:OVER 24m (80ft)

The distance between the speaker and the

Bring the speaker closer to the listening

—

 

listening position is over 24 m (80 ft).

position.

 

 

 

 

 

W-3:LEVEL ERROR

The difference of volume level among

Readjust the speaker installation so that all

—

 

speakers is excessive.

speakers are set in locations with similar

 

 

 

conditions.

 

 

 

 

 

 

 

Check the speaker connections.

13

 

 

 

 

 

 

Use speakers of similar quality.

—

 

 

 

 

 

 

Adjust the output volume of the subwoofer.

30

 

 

 

 

Notes

•If the “ERROR” or “WARNING” screens appears, check the cause of the problem, then run “AUTO SETUP” again.

•If warning message “W-2” or “W-3” appears, the adjustments are made, however the adjustment may not be optimal.

•Depending on the speakers, warning message “W-1” may appears even if the speaker connections are correct.

•If error message “E-10” occurs repeatedly, contact a qualified Yamaha service center.

114 En