6Press HMENU to exit from “SET MENU”.Loading the system settings

Note

If you load the system settings, the settings currently configured are overwritten. If you do not want to erase the current settings, save the settings using the SYSTEM MEMORY feature in advance.

■Loading by the 6SYSTEM MEMORY

buttons

You can recall the system settings stored in “MEMORY1” to “MEMORY4” by pressing the corresponding

6SYSTEM MEMORY buttons.

1Press one of the 6SYSTEM MEMORY buttons on the remote control to select the desired memory number.

“MEMORY 1 LOAD” (example) appears in the front panel display.

SYSTEM MEMORY

1 2 3 4

y

“EMPTY” appears in the menu screen if no system settings are stored in the selected memory number.

2Press the selected 6SYSTEM MEMORY button once more to confirm the selection.This unit loads the settings stored in the selected memory number.■Loading by the SET MENU operation

1Set the operation mode selector on the remote control to EAMP and then press

HMENU.

The top “SET MENU” display appears in the OSD.

2Press 8n to select “SYSTEM MEMORY” and then press 8ENTER.

The “SYSTEM MEMORY” menu appears.

3Press 3ENTER to select “LOAD”.

The current system settings are displayed.

Saving and recalling the system settings (SYSTEM MEMORY)

SYSTEM MEMORY

. LOAD;;;;;;;CURRENT

Church in Freiburg

ADAPTIVE DRC;;AUTO

EQUALIZER;;;;;;PEQ

PEQ TYPE;;;NATURAL

[p]/[[]: Select

[ENTER]: Return

4Press 8l / h repeatedly to select the desired memory number where the systemsettings are stored and then press

8ENTER.

This unit loads the selected system settings.

SYSTEM MEMORY

. LOAD;;;;;;;MEMORY6

Straight

ADAPTIVE DRC;;AUTO

EQUALIZER;;;;;;PEQ

PEQ TYPE;;;;;;FLAT

[p]/[[]: Select

[ENTER]: Load

5Press HMENU to exit from “SET MENU”.

OPERATION

ADVANCED

 

 

English

87 En