Clearing configurations

You can clear all changes made in each function set, such as learned functions, macros, renamed control area names and setup remote control ID.

■Clearing function sets

1Press FSETUP using a ballpoint pen or similar object.

“SETUP” appears in the display window (4).

2Press 8k / n repeatedly to select “CLEAR” and then press 8ENTER.3Press 8k / n repeatedly to select the desired clear mode.

Clear mode

Descriptions

 

 

L:DVD (etc.)

(L:Three-digit name of the selected control area)

 

Clears all learned functions the respective

 

control area. You can change the control area to

 

be cleared by pressing the desired input selector

 

button (3) or 5SELECT l / h repeatedly.

 

 

L:AMP

Sets all learned functions for controlling the

 

amplifier functions to the initial factory settings.

 

Set the operation mode selector to EAMP to

 

select this clear mode.

 

 

L:TV

Clears all learned functions for TV control area.

 

Set the operation mode selector to ETV to

 

select this clear mode.

 

 

L:ALL

Clears all learned functions.

 

 

M:DVD (etc.)

(M:Name of the selected macro button) Clears

 

the macro programmed for the selected macro

 

button (page 96). The assigned macro to the

 

selected macro button reverts to the initial

 

factory macro. Press the desired macro button if

 

you want to change the macro button you want to

 

clear the programmed functions of.

 

 

M:ALL

Clears all programmed macros. The assigned

 

macro to the selected macro button reverts to the

 

initial factory macro.

 

 

RNAME

Set all the name of the control areas to the

 

default settings.

 

 

FCTRY

Set all settings of the remote control to the initial

 

factory settings.

 

 

Remote control features

4Press and hold 8ENTER for about 3 seconds.When the clearing is successful, “OK” appears in the display window (4).

Notes

•“NG” appears in the display window (4) if clearing was unsuccessful.

•“ERROR” appears in the display window (4) if you press a button not indicated in the respective step, or if you press more than one button simultaneously.

5Press FSETUP again to exit from the setup mode.■Clearing a learned function

1Press FSETUP using a ballpoint pen or similar object.

“SETUP” appears in the display window (4).

2Press 8k / n repeatedly to select “ERASE” and then press 8ENTER.3Set the operation mode selector toESOURCE and then press an input selector button (3).

If you want to erase the function learned in the AMP or TV control area, set the operation mode selector to

EAMP or ETV.4Press 8ENTER.“E-KEY” appears in the display window (4).5Press and hold the button you want to clear for about 3 seconds.If clearing is successful, “OK” appears in the display window (4).

y

•If you continuously want to clear another function, repeat step 3 through 5.

•Once you clear a learned function, the button reverts to the factory setting (or to the manufacturer setting if you have set remote control codes).

OPERATION

ADVANCED

 

 

6Press FSETUP again to exit from the setup mode.

Notes

•“NG” appears in the display window (4) on the remote control if clearing was unsuccessful.

•“ERROR” appears in the display window (4) if you press more than one button simultaneously.

English

97 En