Yamaha RX-V1900BL 75 En, 1 SPEAKER MENU, NONE, English, ADVANCED, OPERATION, LFE signals output, Front speakers FRONT SP, Center speaker CENTER SP, LFE/bass out LFE/BASS OUT

1 SPEAKER MENU

Use this feature to manually adjust the basic speaker settings. Most of the “SPEAKER MENU” parameters are set automatically when you run the automatic setup.

y

•Set “TEST TONE” to “ON” (page 77) to output the test tone for the “CONFIG”, “LEVEL” and “DISTANCE” settings.

•If your subwoofer can adjust the output volume and the crossover frequency, set the volume to about half way (or slightly less) and set the crossover frequency to the maximum.

■Speaker configurations A)CONFIGLFE/bass out LFE/BASS OUT

Use this feature to select the speakers that output the LFE (low-frequency effect) and the low-frequency signals.

LFE signals output

	Subwoofer(s) and speakers
Choice
	Subwoofer(s)	Front	Other
		speakers	speakers
BOTH	Output	No output	No output
SWFR	Output	No output	No output
FRONT	No output	Output	No output

Low-frequency signals output

	Subwoofer(s) and speakers
Choice
	Subwoofer(s)	Front	Other
		speakers	speakers
BOTH	*1	*2	*3
SWFR	*4	*3	*3
FRONT	No output	*1	*3

*1 Output(s) the low-frequency signals of the front channels and other speakers set to “SMALL”.

*2 Always output the low-frequency signals of the front channels.

*3 Output the low-frequency signals if the speakers are set to “LARGE”.

*4 Outputs the low-frequency signals of the speakers set to “SMALL”.

Customizing this unit (MANUAL SETUP)

Measure for the speaker sizeThe woofer section of a speaker is–16 cm (6.5 in) or larger: large–smaller than 16 cm (6.5 in): smallFront speakers FRONT SP

Choice	Descriptions
LARGE	Select this setting when the front speakers are
	large.
SMALL	Select this setting when the front speakers are
	small.

Note

When “LFE/BASS OUT” is set to “FRONT”, you can select only “LARGE” in “FRONT SP”. If the value of “FRONT SP” is set to other than “LARGE” in advance, this unit change the value to “LARGE” automatically.

Center speaker CENTER SP

Choice	Descriptions
LARGE	Select this setting when the center speaker is
	large.
SMALL	Select this setting when the center speaker is
	small.
NONE	Select this setting when you do not use the center
	speaker. The center channel signals are directed
	to the front left and right speakers.

Surround left/right speakers SUR. L/R SP

Choice	Descriptions
LARGE	Select this setting when the surround speakers
	are large.
SMALL	Select this setting when the surround speakers
	are small.
NONE	Select this setting when you do not use the
	surround speakers. This unit is set to the Virtual
	CINEMA DSP mode (page 44), and “SUR.B L/
	R SP” is automatically set to “NONE”.

OPERATION ADVANCED

English

75 En