Yamaha RX-V1900BL 9 En, Step 3: Turn on the power and start playback, For other operations

Step 3: Turn on the power and start playback

Check the type of the connected speakers.

If the speakers are 6-ohm speakers, set “SPEAKER IMP.” to “6Ω MIN” before using this unit (page 26). You can also use 4-ohm speakers as the front speakers (page 102).

1Turn on the video monitor connected to this unit.

2Press AMASTER ON/OFF inward to the ON position on the front panel.

3Rotate the CINPUT selector to set the input source to “DVD”.

4Start playback of the desired DVD on your player.

5Rotate QVOLUME to adjust the volume.

Quick start guide

6To set this unit to the standby mode, press B

MAIN ZONE ON/OFF.

INTRODUCTION

y

For details about turning on/off this unit and the standby

	mode, see page 26.
■	For other operations
• Optimizing the speaker parameters
	automatically	☞ P. 30
•	Basic playback operations	☞ P. 35
•	Sound field programs	☞ P. 39
•	Pure high-fidelity sounds	☞ P. 46
•	FM/AM radio tuning	☞ P. 47
• XM Satellite Radio tuning		☞ P. 52
• SIRIUS Satellite Radio tuning		☞ P. 57
•	iPod playback	☞ P. 63
•	Bluetooth component playback	☞ P. 65

English

9 En