Customizing this unit (MANUAL SETUP)

Surround back left/right speakersSUR.B L/R SP

Choice

Descriptions

 

 

LRGx1

Select this setting when the single surround back

 

speaker is large.

 

 

LRGx2

Select this setting when the surround back left

 

and right speakers are large.

 

 

SMLx1

Select this setting when the single surround back

 

speaker is small.

 

 

SMLx2

Select this setting when the surround back left

 

and right speakers are small.

 

 

NONE

Select this setting when you do not use the

 

surround back speakers. The surround back

 

channel signals are directed to the surround left

 

and right speakers.

 

 

Presence speakers PRESENCE SP

Choice

Descriptions

 

 

YES

Select this setting when you use the presence

 

speakers.

 

 

NONE

Select this setting when you do not use the

 

presence speakers.

 

 

Bass cross over CROSS OVER

Use this feature to select the crossover frequency of all the speakers set to “SMALL” (or “SML”) in “CONFIG” (page 75). All frequencies below the selected frequency will be sent to the subwoofer or front speakers depending on the setting of “LFE/BASS OUT” (page 75).

Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 160Hz, 200Hz

y

If your subwoofer can adjust the output volume and the crossover frequency, set the volume to about half way (or slightly less) and set the crossover frequency to the maximum.

Subwoofer phase SUBWOOFER PHASE

Use this feature to switch the phase of your subwoofer if bass sounds are lacking or unclear.

ChoiceFunctions

NORMAL Does not change the phase of your subwoofer.

REVERSE Sets the phase of your subwoofer to reverse.

■Speaker level B)LEVEL

Use this feature to manually balance the speaker levels between the front left or surround left speakers and each speaker selected in “CONFIG” (page 75).

Control range: –10.0 dB to +10.0 dB

Control step: 0.5 dB Initial setting: FR.L/FR.R/SWFR/PR.L/PR.R: 0 dB CENT./SUR.L/SUR.R/SB L/SB R: –1.0 dB

LEVEL

Adjusted speaker

 

 

FR.L

Front left speaker

 

 

FR.R

Front right speaker

 

 

CENT.

Center speaker

 

 

SUR.L

Surround left speaker

 

 

SUR.R

Surround right speaker

 

 

SB L

Surround back left speaker

 

 

SB R

Surround back right speaker

 

 

SWFR

Subwoofer

 

 

PR.L

Presence left speaker

 

 

PR.R

Presence right speaker

 

 

Notes

•The available speaker channels differ depending on the “CONFIG” setting.

•Instead of “SB L” and “SB R”, “SB” is displayed if “SUR. B L/ R SP” is set to either “SMLx1” or “LRGx1”.

■Speaker distance C)DISTANCE

Use this feature to manually adjust the distance of each speaker and the delay applied to the respective channel. Ideally, each speaker should be the same distance from the main listening position. However, this is not possible in most home situations. Thus, a certain amount of delay must be applied to the sound from each speaker so that all sounds will arrive at the listening position at the same time.

Unit for the speaker distance adjustment UNIT

Initial setting:

[U.S.A. and Canada models]: feet (ft)[Other models]: meters (m)

ChoiceFunctions

meters (m) Adjusts speaker distances in meters.

feet (ft)

Adjusts speaker distances in feet.

 

 

76 En