2Press EPOWER to turn on the selected zone.

3Perform the desired operation in the selected zone (page 101).

y

To turn off the desired zone, press CSTANDBY.

■Selecting the input source of Zone 2 or Zone 3

Rotate the CINPUT selector (or set the operation mode selector to EAMP and then press one of the input selector buttons (3)).

•Select “TUNER” as the input source to use the FM/AM tuning features (page 47) in the selected zone.

•Select “XM” as the input source to use the XM Satellite Radio features (page 52) in the selected zone.

•Select “SIRIUS” as the input source to use the SIRIUS Satellite Radio features (page 57) in the selected zone.

•Select “DOCK” as the input source to use the iPod features (page 63) or Bluetooth features (page 65) in the selected zone.

Note

The input sources are shared across all zones. You cannot select the same input source in multiple zones simultaneously.

■Adjusting the volume level of Zone 2 or Zone 3Rotate QVOLUME (or press IVOLUME +/–) .

y

Press KMUTE on the remote control to mute the sound output to the selected zone.

Note

When you use the external amplifiers in Zone 2 or Zone 3,

IVOLUME +/– can be used only when “VOLUME” is set to “VAR” in “ZONE SET” (page 85).

Using multi-zone configuration

■Adjusting the front speaker balance of Zone 2 or Zone 3Press ETONE CONTROL repeatedly to select “BALANCE” and then rotate the NPROGRAMselector for adjustment.■Adjusting the tonal quality of Zone 2 or Zone 3

Press ETONE CONTROL repeatedly to select the high-frequency response (TREBLE) or the

low-frequency response (BASS) and then rotate the NPROGRAM selector for adjustment.

Control range: -10.0 dB to +10.0 dB■Setting the sleep timer for Zone 2 orZone 3Use this feature to turn of the desired zone after a certain amount of time.

Set the operation mode to EAMP and then press BSLEEP repeatedly to set the amount of time.

The sleep timer setting changes as shown below.

120min. 90min.

OFF

30min.

60min.

OPERATION

ADVANCED

 

 

English

101 En