110Routine Maintenance

Routine Maintenance for the Rewind Option

Routine Maintenance for the Rewind Option

When you use the Rewind option, you will periodically need to remove printed labels or used liner from the rewind spindle. You may also need to adjust the media alignment for the Rewind option.

Remove Printed Labels or Liner from the Rewind Spindle

To remove printed labels or liner from the rewind spindle, complete these steps:

1.Cut the liner between the media alignment spindle and the rewind spindle.

2.Rotate the take-up spindle counterclockwise until the rewind media guide is fully upright.

3.Loosen the thumbscrew on the rewind media guide.

79695L-002 Rev. A

Z Series®/RZ™ Series User Guide

6/6/08