Zebra Technologies 79695L-002 RFID Control Panel Parameters, SLOW, SLOW, QUICK, QUICK, CONTINUE, RFID TEST, Perform RFID Test, Table 14 • RFID Parameters (Page 1 of 4)

96RFID Operation

Additional Control Panel Parameters

RFID Control Panel Parameters

The parameters shown in Table 14 display only if the printer has an RFID reader installed.

			Table 14 • RFID Parameters (Page 1 of 4)
Parameter			Action/Explanation
			Perform RFID Test
			In the RFID test, the printer attempts to read and write to a transponder. In
			the slow version, the printer first displays the hardware version, the reader
	RFID TEST		firmware version, and the program position. If the printer fails the test, the
	QUICK	SLOW	control panel displays an error message. No label movement occurs with
			this test.

To perform the RFID test:

1.Press SELECT to select the parameter.

2.Position an RFID label with its transponder over the RFID antenna (coupler) location (1).

1

3.Press MINUS (-)to select QUICK.

OR

Press PLUS (+) to select SLOW.

4.If necessary, press PLUS (+) to select CONTINUE.

5.Press SELECT to deselect the parameter.

79695L-002 Rev. A Z Series®/RZ™ Series User Guide 6/6/08