Zebra Technologies 79695L-002 GEN2, Default:, Default:, Selections:, RFID TAG TYPE, RFID WRITE PWR, RFID ERR STATUS, Selections: 0 to, RFID Error Status, Specify RFID Tag Type

98RFID Operation

Additional Control Panel Parameters

		Table 14 • RFID Parameters (Page 3 of 4)
Parameter			Action/Explanation
			View or Change RFID Write Power
			This parameter displays the current value for RFID write power.
	RFID WRITE PWR		Default: 16
			Selections: 0 to 30
	16		To change the value shown:
			1.	Press SELECT to select the parameter.
			2.	Press PLUS (+) or MINUS (-)to scroll through the options.
			3.	Press SELECT to accept any changes and deselect the parameter.
			RFID Error Status
			During an error condition, an error message shows on the second line of the
			display. This field cannot be modified. For more information on an error
	RFID ERR STATUS		message, refer to the RFID Programming Guide.
			Specify RFID Tag Type
			Select the RFID tag type that you are using.
				Note • RFID transponders operate on different frequencies. You
	RFID TAG TYPE			must use a frequency that complies with local regulations in your
	GEN2			country.
			Default: GEN 2 (EPC Class 1, Gen 2)
			Selections: GEN 2 (EPC Class 1, Gen 2)
			To change the value shown:
			1.	Press SELECT to select the parameter.
			2.	Press PLUS (+) or MINUS (-)to scroll through the options.
			3.	Press SELECT to accept any changes and deselect the parameter.

79695L-002 Rev. A Z Series®/RZ™ Series User Guide 6/6/08