Zebra Technologies 79695L-002 FEED and PAUSE Self Test, To perform a FEED and PAUSE self test, complete these steps:

Troubleshooting 137

Printer Diagnostics

FEED and PAUSE Self Test

Performing this self test temporarily resets the printer configuration to the factory default values. These values are active only until power is turned off unless you save them permanently in memory. If the factory default values are permanently saved, a media calibration procedure must be performed.

To perform a FEED and PAUSE self test, complete these steps:

1.Turn off (O) the printer.

2.Press and hold FEED and PAUSE while turning on (I) the printer.

3.Hold FEED and PAUSE until the first control panel light turns off.

The printer configuration is temporarily reset to the factory default values. No labels print at the end of this test.

6/6/08 Z Series®/RZ™ Series User Guide 79695L-002 Rev. A