92Configuration

Standard Control Panel Parameters

Table 12 • Printer Parameters (Page 24 of 26)

Language/Parameter

Action/Explanation

 

 

See next columnView Sensor Settings

 

These parameters are automatically set during the calibration procedure

 

and should be changed only by a qualified service technician. Refer to the

 

ZPL II Programming Guide for information on these parameters.

To skip these parameters:

1.Press PLUS (+) to skip each of the following parameters:

ZPL only

Select Format Convert

 

 

Selects the bitmap scaling factor. The first number is the original dots per

 

 

 

 

inch (dpi) value; the second, the dpi to which you would like to scale.

 

 

Default Value: NONE

 

 

Selections: NONE, 150 → 300, 150 → 600, 200 → 600, 300 → 600

To change the value shown:

1.Press SELECT to select the parameter.

2.Press PLUS (+) or MINUS (-)to scroll through the options.

3.Press SELECT to accept any changes and deselect the parameter.

79695L-002 Rev. A

Z Series®/RZ™ Series User Guide

6/6/08