Zebra Technologies 79695L-002 PRINT, PRINT, PRINT, ZPL only, List Fonts, List Images, List Bar Codes, ZPL, EPL, APL-D, ZPL, EPL, APL-D, Print Counter Readings

78Configuration

Standard Control Panel Parameters

Table 12 • Printer Parameters (Page 10 of 26)

Language/Parameter Action/Explanation

Print Counter Readings

Prints a label that lists the odometer readings for the following:

•the non-resettable counter

•the two user-controlled counters

•the Early Warning for Maintenance counters, which indicate when the printhead was last cleaned and the printhead life

If the Early Warning for Maintenance feature is disabled, the counters related to it do not print.

	To print a list of the odometer readings:
	1.	Press SELECT to select the parameter.
	2.	Press PLUS (+) to print the odometer readings.
	3.	Press SELECT to deselect the parameter.
ZPL, EPL, APL-D	List Fonts
	This option prints a label that lists the available fonts in the printer,
	including standard printer fonts plus any optional fonts. Fonts may be
	stored in RAM or Flash memory.
	To print a list of the available fonts:
	1.	Press SELECT to select the parameter.
	2.	Press PLUS (+) to select PRINT.
	3.	Press SELECT to deselect the parameter.
ZPL only	List Bar Codes
	This option prints a label that lists the available bar codes in the printer. Bar
	codes may be stored in RAM or Flash memory.
	To print a list of the available bar codes:
	1.	Press SELECT to select the parameter.
	2.	Press PLUS (+) to select PRINT.
	3.	Press SELECT to deselect the parameter.
ZPL, EPL, APL-D	List Images
	This option prints a label that lists the available images stored in the
	printer’s RAM, Flash memory, or optional memory card.

To print a list of the available images:

1.Press SELECT to select the parameter.

2.Press PLUS (+) to select PRINT.

3.Press SELECT to deselect the parameter.

79695L-002 Rev. A Z Series®/RZ™ Series User Guide 6/6/08